US Cargo Control 3/4 Inch x 12 Inch Galvanized Eye Bolt, 7,200 LBS Working Load Limit, Heavy Duty Eye Bolts to Use for Lifting, Rigging, and Anchoring, Intended for Straight Line Pulls

When you need an attachment point or anchor for your rigging setup, look into 3/4 inch eye bolts screw in from US Cargo Control. You can secure wire rope, cable, hooks, and other hardware to the attachment point, but they must be used for straight line pulls. The galvanized rigging eye bolts have a thin coating of zinc oxide to protect the steel from elements, and maintains its strength for long-lasting durability. The lifting eye bolts have a working load limit of 7,200 lbs and assembly break strength of 26,000 lbs, so you can trust that the eye bolt to do the job well when it comes to rigging, anchoring, pulling, pushing, or hoisting. This eyebolt does not have a shoulder so it's intended for straight line pulls only. Note: loading at an angle will significantly reduce a bolt's rated capacity; a 45 degree angle reduces it to just 1/4 of the stated rating. Never load at an angle greater than 45 degrees from the bolt center line. For high-quality eye bolts, use Galvanized 3/4 inch Eye Bolts from US Cargo Control.

• SPECS - (1) Lifting Eye Bolt | Diameter: 3/4" | Shank Length: 12" | Width: 1.69" | Material: Galvanized | Working Load Limit: 7,200 lbs. | Assembly Break Strength: 26,000 lbs. | Product Weight: 2.6 lbs
• MULTI-USE - The 3/4 eye bolts can be used for many applications, including adding an additional eye or anchor to your rigging setup. You can secure wire rope, cable, hooks, and other hardware to the attachment point. Use only for straight line pulls.
• GALVANIZED FINISH - The galvanized eyebolts have a thin coating of zinc oxide to protect the steel from elements, and maintains its strength for long-lasting durability.
• SECURING - The threaded part must protrude through the load so the nut has full engagement of threading. If it protrudes too far through the load, you may need to shim the bolt with washers between the nut and the load prior to putting the nut on.
• HEAVY-DUTY - WIth a working load limit of 7,200 lbs and assembly break strength of 26,000 lbs. you can trust the screw in eye bolts to do the job well when it comes to rigging, anchoring, pulling, pushing, or hoisting applications.