tesa Spaa shower head holder, chromed plastic, self-adhesive, adhesive mounting technology, 40mm x 40mm x 58mm

tesa Spaa shower head holder - self-adhesive, chrome-plated, plasticTraditional mounting methods are reliable but cause drill holes and other damage to walls or tiles. There’s no need for that. The tesa Power.Kit adhesive technology provides an absolutely reliable hold, without any drilling. Surfaces don’t get damaged. The adhesive takes 12 hours to dry, solidly attaching the tesa Spaa shower head holder.* You only need a screwdriver for attachment.* You can take down the holder at any time, no trace of it will remain.* It’s just as simple to apply it in a different position with a new adapter BK27.* “Made in Germany,” the tesa Power.Kit technology guarantees endurance and strong performance.This shower head holder is great-looking, waterproof and just the right thing for your shower. You can safely put in any shower head with a conical connector and of course all shower heads from the tesa Spaa line.Convenient fastening1. Use the included tissue to clean the surface from any dust and grease. Let it dry. Now the adhesive can reach its top strength.2. Peel the protective film off the adapter. Place it on the wall.3. Fill adhesive into the large hole until it starts appearing in the small hole. 4. Wait 12 hours for the adhesive to dry. Use the included Allen key to attach the holder to the adapter.When the time comes to remove the holder, it’s an easy task. After decoupling the accessory from the adapter, twist the latter off with pliers and use a scraper to eliminate left-over residue.The wonderful advantages of the tesa Power.Kit technology can be yours with the tesa Spaa shower head holder!

• No drilling required: The tesa Spaa shower head holder is mounted securely with the tesa Power.Kit technology, the all-in-one adhesive solution.
• Simply beautiful: A waterproof glossy chrome finish along with the fine design makes this a handsome accessory.
• Damage-free: You can keep the drill in its box, since adhesive takes over attachment. Hence, no surfaces suffer damage. At any time, you can take down the holder without a trace.
• Easy to put up: All you need for mounting is a screwdriver. Place the adapter on the wall. Fill the adhesive into the larger hole until it appears in the smaller hole. Allow 12 hours for the adhesive to dry. Connect the holder to the adapter with the included Allen key. After removal, you can simply attach it in a different position with a new adapter BK27.
• Sticks to many surfaces: Suited for tiles, metal, natural stone, marble, concrete, wood, glass and various types of plastic. Not suited for wall paper, stucco and other surfaces with non-stick coating.