Retevis RT22 10-Way Walkie Talkie Charger, Ten Way Multi Unit Charger, for Retevis RT22 RT22S RB19 RB19P RB39 RB39P Walkie Talkie and Battery, 5 LED Indicators, AC/DC Adapter, Replaceable Base(2 Pack)

Compatible DevicesThe RTC22T charger can charge the following Retevis two-way radio models: RT22 / RT622 / RT22S / RT22MX;RB19 / RB619 / RB19P (A little loose, please place the radio correctly);RB39 / RB639 / RB39P / RB639P (The opposite of RT22 positive and negative poles, please place the radio correctly);The ten charging cups of the RTC22T charger are replaceable, so this charger can charge a wide range of two-way radios with 3.7V Li-ion batteries.Important Safety InstructionsPlease read and follow the safety instructions and keep the instructions where they can be easily referenced.To reduce the risk of fire or electrical shock, keep the charger completely dry and never use it near water. Avoid exposing it to rain or humidity.To reduce risk of electric shock, unplug the charger power supply from the AC outlet before attempting any cleaning.Clean only with a dry cloth.Keep all vents clear and clean. Install in accordance with the manufacturer’s instruction. The AC outlet to which the power cord is connected must be close and easily accessible. Make sure the power supply or power cord to the charger is located where it will not be stepped on, tripped over, or subjected to water, damage, or stress. To reduce risk of fire, electric shock, or injury, do not operate the charger if it has been broken or damaged in any way. Do not use or store near heat sources such as radiators, heat registers, stoves, amplifiers, or other objects that produce heat. If the provided plug is defective or does not fit into your outlet, contact your customer support for replacement. Avoid holding the charger by its cord, and keep the cord from being crushed or pinched. To reduce risk of damage to the power supply electric plugs and cords, pull the plug rather than the cord when disconnecting from the AC/DC outlet or the charger. Only use attachments or accessories specified by the manufacturer.

• Efficient charging; 10 way charger compatible with RT22 RT22S RB19 RB19P RB39 RB39P (RB39 RB39P needs to be charged with the positive and negative poles reversed);allowed to recharge 10 two way radios at the same time; the charging efficiency is improved and charging time is reduced
• 5 LED indicators; clear to see the charging status of 10 way charger anytime; such as red refers to charging and green refers to charging process; no need to worry about affecting normal use due to battery power problem
• Strong compatibility; supports AC and DC power supplies and come with a USB, Type-c port; muilt-unit charger supports charging mobile phones and iPads; bring convenience for recharging walkie talkies when users work indoors or outdoors
• Durable to use; adopting ABS and PC material; 10 way charger is durable to use for a long time without frequent change
• Detachable charging slots; each charging slot is easy to remove and replace; compared with walkie talkie charger; replace the broken charging slots will spend less and save costs
• Overheat protection and one-key power switch; in addition to the included overvoltage and overcurrent protection function; 10 way charger features overheat protection to enhance charging safety
• Easy to carry; the size is 360*214*65mm/14.1*9.5*2.6inch; portable walkie talkie charger is easy to put on the desk or in the vehicle without taking up space