REEHUT 550W Dental Lab Wet Model Shaping Trimmer Abrasive Manual Water Supply Trimming Plaster Model (Diamond Disc Wheel)

Application: This machine is widely used in lab restorative profession, it is the necessary product for all kinds of plaster models grinding and shaping, the machine has ≥30 degrees of angle adjustment, which can make the plaster model trimming more perfect. Parameters: Voltage: 220V 50HZ / 110V 60HZ Power:550W Wheel Size: outer 250*inner 32mm Speed: 2800r/min Wheel: Diamond Disc Wheel Instructions for use 1、Firstly install the four shock-absorbing feet of the plaster finishing machine, place the machine in a smooth position, and connect the power supply. 2、Connect the water inlet pipe with the faucet tightly to avoid falling off. 3、Place the downpipe smoothly without buckling, so as to avoid water in the machine memory, resulting in serious splashing when the machine is running. 4, start the power supply, observe the motor has no strange sound, sand rotation is smooth, if abnormal. If there is any abnormality, stop the machine immediately for maintenance. 5、Observe whether the water supply has the effect of removing dust and removing the plaster powder adhered on the sand piece, if the effect is not good, adjust the size of faucet opening and closing. 6、Adjustment of sanding angle is light and flexible, <30 degrees, can be sanded into 75 degrees-105 degrees of different angles. Notice: 1.Must clean the plaster debris left in the machine, so that the drainage is smooth. 2.Drainage pipe must not be warped, otherwise it will lead to poor drainage of water in the machine and serious splash when sanding 3.No water use, so as not to plaster the sand piece putty flat, affecting the use. Pacakge listing: Host *1 Power cord *1 Upper water pipe*1 Downpipe*1 Hose band *2 Wrench*1 Suction cup*4

• 【Durability】 High-quality wet model trimmers have a longer lifespan, enduring frequent use without damage
• 【Low Noise】Low noise and vibration when the machine is running, providing you with a quieter working environment
• 【Superior Performance】Wet model trimmer is made of high-quality metal and comes with up to 550W engine for powerful operation. It achieves a high speed of 2800 rpm for easy slicing. Weighing more than 20 kilograms, it can be mounted on non-slip feet for stable operation
• 【Creating Fine Details】Dental models require the creation of intricate structures and shapes at specific areas to ensure precision. The wet model trimmer assists in achieving these fine details
• 【Enhancing Efficiency】Using the model trimmer allows for quick and precise trimming, saving time and increasing efficiency