Pipe Blockage Detector Locators-Sensor - Water Pipe Wall Scanner 20m/30m/40m Pipeline Magnetic Detector Metal PVC Water Pipes Clogging Tool,30M-110V

♥Instructions:1. Insert the ends of the signal cable and transmission cable into the duct until the signal cable cannot go any further. At this time, the position of the probe is the blocking position.2. Turn on the power switch of the Teleporter, and the green indicator light will be on.3. Turn on the power switch of the receiver, and use the hand-held signal receiver to detect the general direction of the buried pipeline. If you get close to the inside of the pipe, the receiver's earpiece will hum. The loudest part is the choke point. Make a mark and pull out the signal wire. It can be dealt with by digging the ground again.4. After a long period of continuous use, the green light of the product will start to flash, indicating that the remaining power can be used for about half an hour. Please pay attention to charging in time.♥Specifications:Name: Pipeline Blockage Locator Kitmaterial: plasticColor: red+blackTeleporter Specifications:Scope of application: PVC pipe, plastic pipe, cement pipe, iron pipe, metal pipeWorking frequency: 300HzWorking hours: 10HWorking temperature: 0-40℃Battery: 3.7 V, 2600 mAh battery (included)Receiver Specifications:Distance range: 0-0.6 m (metal pipe); 0-0.15m (non-metal pipe)Sensitivity Adjustment: YesWorking frequency: 300HzWorking hours: 20HBattery: 3.7V 1400mAh rechargeable battery (included)Item Dimensions:Receiver: 360*65*40mmTeleporter: 360*300*45mm♥Packing list:1 * Teleporter host (including lithium battery)1 * receiver (with lithium battery)1 * Double-ended charging cable1 * earphone8 * Teleporter probe accessories1*502 glue1 * English instruction manual

• 【HIGH-PRECISION POSITIONING】Pipeline blockage locator adopts the principle of electromagnetic induction.Strong signal penetration and precise positioning.Use Pipe blockage emitter and receiver to locate blockages in metal pipes, PVC pipes, water pipes and wall nails. According to the strength of the signal. Generate buzzing sounds of different sizes to locate the blockage.
• 【STRONG SIGNAL PENETRATION】The pipe plug tester can pass through 40cm thick walls, reducing the distance range. It pinpoints invisible blockages and detects and pinpoints the interior of clogged pipes.The stronger the signal, the brighter the red light.
• 【ADJUSTABLE SENSITIVITY】The receiver can increase the detection ability of the Teleporter by adjusting its sensitivity.
• 【WATERPROOF PROBES】The pipe lock detector is equipped with 8 waterproof probes, in the harsh environment with water can also be measured accurately Long service life.
• 【RECHARGEABLE LITHIUM BATTERY】This water Pipe Locator Sensor has a built-in Teleporter 2600mAh,receiver 1400mAh.Fully charged can work for 10h/5h.With low voltage display function.