PAC SWI-RC Steering Wheel Control Interface Designed for All Major Radio Brands, Universal Interface SWI-RC1

The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc.). If the radio does not have a wired remote input then you will need to use the SWI-X.Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5.Clarion model CZ500 does not support remote Bluetooth controlsJVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controlsPioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer.Pioneer radios with Bluetooth feature, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer.Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH and the AVIC-X920BT, X930BT, X940BT will support the Voice Recognition function via wired remote input.

• Fast and easy steering wheel control retention for over 3000 vehicles with the PAC SWI-RC-1
• Quick and easy pre-programmed button function by DIP switch selection
• Works on Analog (resistive) and Data SWC systems
• For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC
• Supports classic, SWI-RC style button programming
• Customizable button functions (short press/long press/button reassignment)
• Provides 2 amp, 12volt accessory output (CAN-Bus, LAN and Class II applications)
• Compatible with all late model brands of radios with 3.5mm or two wire connections