Null Modem Adapter Cable F1T-D2I USB to RS232 Serial D-sub 9 Pin DB9 Female Crosswire Rollover Converter Cable

USB to DB9 Female RS232 Serial Null Modem Rollover Cable Length:1.8MInternal Chip: F1T-D2I FT232RNL Internal EEPROM with user writeable area. VIRTUAL COM PORT (VCP) Driversare available for the following Operating Systems (OS):- 11,10,8.1,8,Vista,7,XP- 98, 98SE, ME, 2000, - Server 2003, XP, Server 2008 and server 2012 R2- XP Embedded- CE 4.2, 5.0 and 6.0- OS 8/9, OS-X- Linux 2.4 and greater - And-roid(J2xx / D2xx only)See the following website for the full driver support list including OS versions and OS.https://ftdichip.com/drivers/Virtual COM Port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.Please also refer to the Installation Guides documents for details on how to install the drivers.https://ftdichip.com/document/installation-guides/connects two devices of the same TY>pe, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink. Such a distinction between devices was introduced .The crossing of wires in a cable or in a connector adaptor allows:* connecting two devices directly, output of 1 to input of the other,* letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e. PCs,* linking two or more hubs, switches or routers (DCE) together, possibly to work as 1 wider device.F1T-D2I FT232RNL Features Entire USB protocol handled by the electronics in the cable USB. EIA/TIA-232 and V.28/V.24 communication interface with low power requirements. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. Internal EEPROM with user writeable area. F1T-D2I's royalty-free VCP allow for communication as a standard emulated COM port and D2XX 'direct' drivers provide DLL applic

• TY>pe : Serial Cable
• Virtual COM Port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.