GEX Clear LED Power III/IV Dedicated Hanging Parts, for Aquarium Surroundings, Hanging Fixed, Dedicated Parts Set, Light Holder

Illuminate multiple aquariums together for a clean clear LED POWERIII and POWERIV LED hanging parts; Illuminates multiple aquariums and cleanly around the aquarium; This is a dedicated part set that allows you to hang and fix the clear LED power 3/4 on a metal rack or wooden board. It can illuminate multiple aquariums in one place, allowing you to clean up your aquarium. ■ When using wood screws: Ensure the thickness of the wood board to be mounted is at least 0.4 inches (1 cm) and secure the holder with wood screws. A Phillips screwdriver is required. Requires a thickness of 0.4 inch (1 cm) or more. When hanging with S rings (sold separately): Secure the ring with plastic screws on the holder, hang the S ring or string to the ring. Please be careful not to overtighten the plastic screws. When securing the tie band (sold separately): Pass the tie band through the holes in the two places of the holder. This product is for Aquarium Fish Lighting Fixture Clear LED Power 3/4 only. Please be sure to install the aquarium platform with a larger water capacity than 6.6 gal (20 L) or a dedicated aquarium. If the plastic screws become hard and cannot be removed, please secure the head of the plastic screw with a wrench and turn the ring side to remove it. Please check if the LED is securely attached to this product. This may cause the LED to fall off. Please check if the screws are not loose. Do not place objects on the LED. Set Includes: Holder (2 pcs), wood screws (2 pcs), plastic screws (2 pcs), ring (2 pcs).

• Illuminate multiple aquariums together for a clean and clear LED for POWERIII and POWERIV LED hanging parts
• Illuminate multiple aquariums together and clean around the aquarium; This is a special set of parts that allow you to hang and fix the clear LED power 3/4 on a metal rack or wood board. It can illuminate multiple aquariums in one place, allowing you to clean up your aquarium
• ■ When using wood screws: Ensure the thickness of the wood board to be mounted is at least 0.4 inches (1 cm) and secure the holder with wood screws. A Phillips screwdriver is required. Requires a thickness of 0.4 inch (1 cm) or more. ■ When hanging with S ring (sold separately): Secure the ring with plastic screws on the holder, hang the S ring or string to the ring. Please be careful not to overtighten the plastic screws. ■ When securing the tie band (sold separately): Pass the tie band through the holes in the holder in two places
• This product is for Aquarium Fish Lighting Fixture Clear LED Power 3/4 only. Please be sure to install the aquarium platform with a larger water capacity than 6.6 gal (20 L) or a dedicated aquarium. If the plastic screws become hard and cannot be removed, please secure the head of the plastic screw with a wrench and turn the ring side to remove it. Please check if the LED is securely attached to this product. This may cause the LED to fall off. Please check if the screws are not loose. Do not place objects on the LED
• Set Includes: Holder (2 pcs), wood screws (2 pcs), plastic screws (2 pcs), ring (2 pcs)